Allis Chalmers 8070 VS Holder Cultitrac A12 specs comparison
Allis Chalmers 8070
General Infos| Make | Allis Chalmers |
| Model | 8070 |
| Country | United states |
| Production | From 1982 Until 1985 |
| Price | 60,337 USD |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | Allis Chalmers 8070 Manual |
Dimensions, sizes and tires
| AG front tires | 11.00-16 (2WD) |
| AG rear tires | 20.8-38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 16,850 lbs or 7643 kg |
| Length | 187 inches [474 cm] |
| Width | 95.5 inches [242 cm] |
| Height | 116 inches [294 cm] |
| Wheelbase | 106 inches [269 cm] |
| Ground clearance | 22 inches [55 cm] (front axle) |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 426 ci or 7.0 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2400 (rpm) |
| Torque | - |
| Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 60 gal or 227.1 L |
| Oil capacity | 19 qts or 18.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers 8070 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 100 amps |
| Trans system | Power Shift |
| Trans type | Allis-Chalmers |
| Trans gears | 12 forward and 2 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential hydraulic wet discs |
| Cabin type | Acousta cab standard with heat and air-conditioning |
| Differentiel lock | foot-button |
| System | closed-center load-sensitive |
| Valves | 2 or 3 |
| Pump flow | 22 gpm or 83.3 lpm |
| SVC flow | - |
| Steering flow | 9.5 gpm or 36.0 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 45 gpm or 170.3 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 145.36 hp or 108.4 kW |
| Fuel consumption | - |
| Pulling power | 18,777 lbs or 8517 kg |
| Claimed power | - |
| Real power | 171.44 hp or 127.8 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 1000 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 10.4 gal/hour or 39.4 l/hour |
| Hitch system | - |
| Rear hitch | III/II |
| Rear hitch lift | 8,200 lbs or 3719 kg |
| Front hitch | - |
| Front hitch lift | - |
Holder Cultitrac A12
General Infos| Make | Holder |
| Model | Cultitrac A12 |
| Country | Germany |
| Production | From 1956 |
| Price | - |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Holder Cultitrac A12 Manual |
Dimensions, sizes and tires
| AG front tires | 5.50x16 |
| AG rear tires | 5.50x16 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 1500 lbs or 680 kg |
| Length | 80 inches [203 cm] |
| Width | 30 inches [76 cm] |
| Height | - |
| Wheelbase | 45 inches [114 cm] |
| Ground clearance | 9.5 inches [24 cm] |
| Turning radius | 6 feet [1.8 m] |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 36.9 ci or 0.6 L |
| Cylinders | 1 cylinders |
| Engine power | 12 hp or 8.9 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - |
| Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | direct injection |
| Fuel tank size | 2.5 gal or 9.5 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Holder Cultitrac A12 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | - |
| Trans gears | 6 forward and 3 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x4 articulated 4WD |
| Final drive | - |
| Steering | - |
| Braking system | drum |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | - |
| Pump flow | 2.6 gpm or 9.8 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 1 gal or 3.8 L |
| Hydraulic pressure | 1850 psi or 127.6 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Holder Cultitrac A12 J.I. Case 351
Holder Cultitrac A12 Fortschritt R-S 09
Allis Chalmers 8070 International Harvester D-320
Holder Cultitrac A12 Farmall 200
Holder Cultitrac A12 Lanz Alldog A1806
Holder Cultitrac A12 Ford 641
Choose another tractor
Useful links and guides ....
- Allis Chalmers provided us with the latest version of its 8070 service repair manual
- Find All mechanical and electrical parts and accessories of Allis Chalmers 8070 farm-tractor here
- Get your Holder Cultitrac A12 manual book version
- Cabine, electrical And mechanical parts for Holder Cultitrac A12 farm-tractor here
