Deutz-Fahr Intrac 6.05 VS Allis Chalmers 8010 specs comparison
Deutz-Fahr Intrac 6.05
General Infos| Make | Deutz-Fahr |
| Model | Intrac 6.05 |
| Country | Germany |
| Production | From 1987 Until 1988 |
| Price | - |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr Intrac 6.05 Manual |
Dimensions, sizes and tires
| AG front tires | 16.9R34 |
| AG rear tires | 16.9R34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 10804 lbs or 4900 kg |
| Length | 203.94 inches [518 cm] |
| Width | - |
| Height | 123.23 inches [313 cm] |
| Wheelbase | 106.30 inches [270 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 344.89 ci or 5.7 L |
| Cylinders | 6 cylinders |
| Engine power | 98 hp or 73.1 kW |
| Engine RPM | 2300 (rpm) |
| Torque | - |
| Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 35.7 gal or 135.1 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Deutz-Fahr Intrac 6.05 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | - |
| Trans gears | 20 forward and 5 reverse |
| Clutch system | - |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | - |
| Braking system | - |
| Cabin type | - |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | 14.8 gpm or 56.0 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | 6284 lbs or 2850 kg |
| Front hitch | - |
| Front hitch lift | - |
Allis Chalmers 8010
General Infos| Make | Allis Chalmers |
| Model | 8010 |
| Country | United states |
| Production | From 1982 Until 1985 |
| Price | 46,176 USD |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Allis Chalmers 8010 Manual |
Dimensions, sizes and tires
| AG front tires | 11.00-16 (2WD) |
| AG rear tires | 20.8-38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 12,630 lbs or 5728 kg |
| Length | 187 inches [474 cm] |
| Width | 92.6 inches [235 cm] |
| Height | 114 inches [289 cm] |
| Wheelbase | 106 inches [269 cm] (2WD) |
| Ground clearance | 17.5 inches [44 cm] (4WD front axle) |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 301 ci or 4.9 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2300 (rpm) |
| Torque | - |
| Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 60 gal or 227.1 L |
| Oil capacity | 16 qts or 15.1 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers 8010 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 100 amps |
| Trans system | Power Shift |
| Trans type | Allis-Chalmers |
| Trans gears | 12 forward and 2 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential hydraulic wet discs |
| Cabin type | Acousta cab standard with heat and air-conditioning |
| Differentiel lock | foot-button |
| System | load-sensitive |
| Valves | 2 or 3 |
| Pump flow | 22 gpm or 83.3 lpm |
| SVC flow | - |
| Steering flow | 9.5 gpm or 36.0 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 45 gpm or 170.3 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 91.46 hp or 68.2 kW |
| Fuel consumption | 7.3 gal/hour or 27.6 l/hour |
| Pulling power | 9,102 lbs or 4128 kg |
| Claimed power | - |
| Real power | 109.55 hp or 81.7 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 7.3 gal/hour or 27.6 l/hour |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | 6,680 lbs or 3030 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Deutz-Fahr Intrac 6.05 Hinomoto E2602
Allis Chalmers 8010 Massey Ferguson 284SK
Allis Chalmers 8010 Lamborghini 674-70
Deutz-Fahr Intrac 6.05 Renault 1181S
Allis Chalmers 8010 Schluter Compact 1150 TV 6
Allis Chalmers 8010 Renault 781S
Choose another tractor
Useful links and guides ....
- Deutz-Fahr provided us with the latest version of its Intrac 6.05 service repair manual
- Find All mechanical and electrical parts and accessories of Deutz-Fahr Intrac 6.05 farm-tractor here
- Get your Allis Chalmers 8010 manual book version
- Cabine, electrical And mechanical parts for Allis Chalmers 8010 farm-tractor here
