International Harvester 660 VS Allis Chalmers H3 specs comparison
International Harvester 660
General Infos| Make | International Harvester |
| Model | 660 |
| Country | United states |
| Production | From 1959 Until 1963 |
| Price | 6,000 USD |
| Tractor type | Standard tread tractor |
| Fuel | gasoline |
| Service repair manual | International Harvester 660 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50-18 |
| AG rear tires | 18.4/15-34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | 23.1/18-26 |
| Weight | 9,635 lbs or 4370 kg |
| Length | 142.6 inches [362 cm] |
| Width | 78 inches [198 cm] (min) |
| Height | - |
| Wheelbase | 85.5 inches [217 cm] |
| Ground clearance | 19.7 inches [50 cm] (frame) |
| Turning radius | 14.5 feet [4.4 m] |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 263 ci or 4.3 L |
| Cylinders | 6 cylinders |
| Engine power | 95 hp or 70.8 kW |
| Engine RPM | 2400 (rpm) |
| Torque | 212 lb-ft or 287.5 Nm | Torque RPM | 1200 (rpm) |
| Fuel type | gasoline |
| Fuel injection | - |
| Fuel tank size | 33 gal or 124.9 L |
| Oil capacity | 9 qts or 8.5 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | International Harvester 660 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Torque Amplifier |
| Trans type | - |
| Trans gears | 10 forward and 2 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | independent mechanical disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | 1 |
| Pump flow | - |
| SVC flow | - |
| Steering flow | 2.5 gpm or 9.5 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 12 gpm or 45.4 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 69.66 hp or 51.9 kW |
| Fuel consumption | 8.8 gal/hour or 33.3 l/hour |
| Pulling power | 11,046 lbs or 5010 kg |
| Claimed power | - |
| Real power | 80.63 hp or 60.1 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 8.9 gal/hour or 33.7 l/hour |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Allis Chalmers H3
General Infos| Make | Allis Chalmers |
| Model | H3 |
| Country | United states |
| Production | From 1960 Until 1967 |
| Price | - |
| Tractor type | - |
| Fuel | gasoline |
| Service repair manual | Allis Chalmers H3 Manual |
Dimensions, sizes and tires
| AG front tires | 7-inch track |
| AG rear tires | 7-inch track |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 7395 lbs or 3354 kg |
| Length | 108.75 inches [276 cm] |
| Width | - |
| Height | - |
| Wheelbase | 64 inches [162 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 48 inches |
| Front tread size | 48 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 149 ci or 2.4 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1650 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | gasoline |
| Fuel injection | Marvel-Schebler carburetor |
| Fuel tank size | 14 gal or 53.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers H3 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Power Director |
| Trans type | mechanical shuttle |
| Trans gears | 4 forward and reverse |
| Clutch system | wet disc (Power Director) |
| Wheel drive | crawler |
| Final drive | - |
| Steering | mechanical clutches |
| Braking system | mechanical contracting band |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 15 gpm or 56.8 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 16.5 gal or 62.5 L |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 25.48 hp or 19.0 kW |
| Fuel consumption | 2.9 gal/hour or 11.0 l/hour |
| Pulling power | 7893 lbs or 3580 kg |
| Claimed power | - |
| Real power | 32.11 hp or 23.9 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | optional |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 2.9 gal/hour or 11.0 l/hour |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Allis Chalmers H3 Allis Chalmers HD3
Allis Chalmers H3 International Harvester 140
International Harvester 660 Chamberlain Canelander
Allis Chalmers H3 Volvo T350 Boxer
International Harvester 660 Lanz 300
Allis Chalmers H3 Lanz 500
Choose another tractor
Useful links and guides ....
- International Harvester provided us with the latest version of its 660 service repair manual
- Find All mechanical and electrical parts and accessories of International Harvester 660 farm-tractor here
- Get your Allis Chalmers H3 manual book version
- Cabine, electrical And mechanical parts for Allis Chalmers H3 farm-tractor here
