Massey Ferguson 2775 VS International Harvester 826 specs comparison
Massey Ferguson 2775
General Infos| Make | Massey Ferguson |
| Model | 2775 |
| Country | United states |
| Production | From 1978 Until 1983 |
| Price | 51,500 USD |
| Tractor type | - |
| Fuel | - |
| Service repair manual | Massey Ferguson 2775 Manual |
Dimensions, sizes and tires
| AG front tires | 11.00-16 |
| AG rear tires | 20.8-38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | Shipping: |
| Length | 190 inches 482 cm |
| Width | 91.6 inches 232 cm (standard axle) |
| Height | - |
| Wheelbase | 110 inches 279 cm |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 71 to 92 inches |
| Front tread size | 60 to 80 inches |
| Turning radius | 13300 lbs 6032 kg |
Horsepower and engin specs
| Engine capacity | - |
| Cylinders | 8 cylinders |
| Engine power | - |
| Engine RPM | 2600 (rpm) |
| Torque | - |
| Torque RPM | - |
| Fuel type | - |
| Fuel injection | direct injection |
| Fuel tank size | 87 gal 329.3 L |
| Oil capacity | 24 qts 22.7 L |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Massey Ferguson 2775 Parts |
| Batteries number | 2 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 58 amps |
| Trans system | - |
| Trans type | mechanical shuttle |
| Trans gears | 8 forward and 6 reverse |
| Clutch system | 356mm dual cerametallic dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | planetary |
| Steering | hydrostatic power |
| Braking system | hydraulic wet disc |
| Cabin type | Cab standard with air-conditioning |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 160 hp 119.3 kW |
| Real power | - |
| Engine @RPM | 1000@2090 (rpm) |
| PTO Clutch | hydraulic |
| Rear PTO | independent |
| Rear PTO RPM | 1000 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position control and lower-link draft sensing |
| Rear hitch | III/II |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
International Harvester 826
General Infos| Make | International Harvester |
| Model | 826 |
| Country | United states |
| Production | From 1969 Until 1971 |
| Price | - |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | International Harvester 826 Manual |
Dimensions, sizes and tires
| AG front tires | 9.5L-15 |
| AG rear tires | 18.4-34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 9860 lbs or 4472 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | 105 inches [266 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 301 ci or 4.9 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2400 (rpm) |
| Torque | - |
| Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 37 gal or 140.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | International Harvester 826 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | International Harvester Torque Amplifier |
| Trans type | hydrostatic |
| Trans gears | infinite forward and reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | hydraulic dry disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 61 hp or 45.5 kW |
| Drawbar horsepower | 61.39 hp or 45.8 kW |
| Fuel consumption | 6.1 gal/hour or 23.1 l/hour |
| Pulling power | 8,780 lbs or 3982 kg |
| Claimed power | 84 hp or 62.6 kW |
| Real power | 79.00 hp or 58.9 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 5.6 gal/hour or 21.2 l/hour |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
International Harvester 826 International Harvester 574
Massey Ferguson 2775 John Deere WA-17
Massey Ferguson 2775 Landini 5000
International Harvester 826 International Harvester 1256
International Harvester 826 Fiat 900
International Harvester 826 Deutz D 7006
Choose another tractor
Useful links and guides ....
- Massey Ferguson provided us with the latest version of its 2775 service repair manual
- Find All mechanical and electrical parts and accessories of Massey Ferguson 2775 farm-tractor here
- Get your International Harvester 826 manual book version
- Cabine, electrical And mechanical parts for International Harvester 826 farm-tractor here
