Steiger Bearcat III ST-225 VS Allis Chalmers H3 specs comparison
Steiger Bearcat III ST-225
General Infos| Make | Steiger |
| Model | Bearcat III ST-225 |
| Country | United states |
| Production | From 1980 Until 1983 |
| Price | 66,000 USD |
| Tractor type | - |
| Fuel | - |
| Service repair manual | Steiger Bearcat III ST-225 Manual |
Dimensions, sizes and tires
| AG front tires | 23.1-34 |
| AG rear tires | 23.1-34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | - |
| Length | 252 inches 640 cm |
| Width | 96 inches 243 cm (tractor body) |
| Height | - |
| Wheelbase | 128 inches 325 cm |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | - |
| Cylinders | 6 cylinders |
| Engine power | 225 hp 167.8 kW |
| Engine RPM | 2100 (rpm) |
| Torque | 730 lb-ft 989.9 Nm |
| Torque RPM | 1300 (rpm) |
| Fuel type | - |
| Fuel injection | - |
| Fuel tank size | 267 gal 1010.6 L |
| Oil capacity | 29 qts 27.4 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Steiger Bearcat III ST-225 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 90 amps |
| Trans system | - |
| Trans type | - |
| Trans gears | 20 forward and 4 reverse |
| Clutch system | 355.6mm hydraulic dry disc |
| Wheel drive | 4x4 articulated 4WD |
| Final drive | outboard planetary |
| Steering | hydrostatic power |
| Braking system | hydraulic dry disc |
| Cabin type | Safari Cab standard with heat and air-conditioning |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | - |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | 3 |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Allis Chalmers H3
General Infos| Make | Allis Chalmers |
| Model | H3 |
| Country | United states |
| Production | From 1960 Until 1967 |
| Price | - |
| Tractor type | - |
| Fuel | gasoline |
| Service repair manual | Allis Chalmers H3 Manual |
Dimensions, sizes and tires
| AG front tires | 7-inch track |
| AG rear tires | 7-inch track |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 7395 lbs or 3354 kg |
| Length | 108.75 inches [276 cm] |
| Width | - |
| Height | - |
| Wheelbase | 64 inches [162 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 48 inches |
| Front tread size | 48 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 149 ci or 2.4 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1650 (rpm) |
| Torque | - |
| Torque RPM | - |
| Fuel type | gasoline |
| Fuel injection | Marvel-Schebler carburetor |
| Fuel tank size | 14 gal or 53.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers H3 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Power Director |
| Trans type | mechanical shuttle |
| Trans gears | 4 forward and reverse |
| Clutch system | wet disc (Power Director) |
| Wheel drive | crawler |
| Final drive | - |
| Steering | mechanical clutches |
| Braking system | mechanical contracting band |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 15 gpm or 56.8 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 16.5 gal or 62.5 L |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 25.48 hp or 19.0 kW |
| Fuel consumption | 2.9 gal/hour or 11.0 l/hour |
| Pulling power | 7893 lbs or 3580 kg |
| Claimed power | - |
| Real power | 32.11 hp or 23.9 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | optional |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 2.9 gal/hour or 11.0 l/hour |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Allis Chalmers H3 Allis Chalmers HD3
Steiger Bearcat III ST-225 John Deere 530
Steiger Bearcat III ST-225 Zetor 3011
Allis Chalmers H3 McCormick-Deering B-450
Allis Chalmers H3 Farmall B-450
Allis Chalmers H3 Cockshutt 570
Choose another tractor
Useful links and guides ....
- Steiger provided us with the latest version of its Bearcat III ST-225 service repair manual
- Find All mechanical and electrical parts and accessories of Steiger Bearcat III ST-225 farm-tractor here
- Get your Allis Chalmers H3 manual book version
- Cabine, electrical And mechanical parts for Allis Chalmers H3 farm-tractor here
