Steiger Bearcat IV CM-225 VS Allis Chalmers HD3 specs comparison
Steiger Bearcat IV CM-225
General Infos| Make | Steiger |
| Model | Bearcat IV CM-225 |
| Country | United states |
| Production | From 1983 Until 1985 |
| Price | - |
| Tractor type | Four wheel Drive (4WD) tractor |
| Fuel | diesel |
| Service repair manual | Steiger Bearcat IV CM-225 Manual |
Dimensions, sizes and tires
| AG front tires | 23.1x34 |
| AG rear tires | 23.1x34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 24711 lbs or 11208 kg |
| Length | 253.6 inches [644 cm] |
| Width | 96 inches [243 cm] |
| Height | 134.8 inches [342 cm] |
| Wheelbase | 129 inches [327 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 638 ci or 10.5 L |
| Cylinders | 6 cylinders |
| Engine power | 225 hp or 167.8 kW |
| Engine RPM | 2100 (rpm) |
| Torque | 730 lb-ft or 989.9 Nm |
| Torque RPM | 1300 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 267 gal or 1010.6 L |
| Oil capacity | 29 qts or 27.4 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Steiger Bearcat IV CM-225 Parts |
| Batteries number | 3 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 90 amps |
| Trans system | Spicer SST1010 |
| Trans type | constant mesh gear |
| Trans gears | 20 forward and 4 reverse |
| Clutch system | - |
| Wheel drive | 4x4 articulated 4WD |
| Final drive | outboard planetary |
| Steering | articulated power |
| Braking system | hydraulic disc |
| Cabin type | Steiger Safari Cab standard with air-conditioning |
| Differentiel lock | - |
| System | open center |
| Valves | 3 to 5 |
| Pump flow | 31 gpm or 117.3 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2250 psi or 155.1 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 195 hp or 145.4 kW |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | - |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | III |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Allis Chalmers HD3
General Infos| Make | Allis Chalmers |
| Model | HD3 |
| Country | United states |
| Production | From 1960 Until 1968 |
| Price | - |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Allis Chalmers HD3 Manual |
Dimensions, sizes and tires
| AG front tires | 7-inch track |
| AG rear tires | 7-inch track |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 7645 lbs or 3467 kg |
| Length | 108.75 inches [276 cm] |
| Width | - |
| Height | - |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 48 inches |
| Front tread size | 48 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 175 ci or 2.9 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1650 (rpm) |
| Torque | - |
| Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | Roosa-Master injection |
| Fuel tank size | 14 gal or 53.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers HD3 Parts |
| Batteries number | 2 |
| Batteries voltage | 6 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Power Director |
| Trans type | mechanical shuttle |
| Trans gears | 4 forward and reverse |
| Clutch system | wet disc (Power Director) |
| Wheel drive | crawler |
| Final drive | - |
| Steering | mechanical clutches |
| Braking system | mechanical contracting band |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 15 gpm or 56.8 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 16.5 gal or 62.5 L |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 26.17 hp or 19.5 kW |
| Fuel consumption | 2.6 gal/hour or 9.8 l/hour |
| Pulling power | 8207 lbs or 3722 kg |
| Claimed power | - |
| Real power | 32.53 hp or 24.3 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | optional |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 2.6 gal/hour or 9.8 l/hour |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Steiger Bearcat IV CM-225 Allis Chalmers H3
Allis Chalmers HD3 Stihl S 20
Allis Chalmers HD3 Zetor 3045
Steiger Bearcat IV CM-225 J.I. Case 700
Allis Chalmers HD3 Farmall B-450
Steiger Bearcat IV CM-225 Fendt Farmer 2D
Choose another tractor
Useful links and guides ....
- Steiger provided us with the latest version of its Bearcat IV CM-225 service repair manual
- Find All mechanical and electrical parts and accessories of Steiger Bearcat IV CM-225 farm-tractor here
- Get your Allis Chalmers HD3 manual book version
- Cabine, electrical And mechanical parts for Allis Chalmers HD3 farm-tractor here
