Steiger Tiger III ST-470 VS Allis Chalmers 8010 specs comparison

Steiger Tiger III ST-470 1980 comparison online with competitors

Steiger Tiger III ST-470

General Infos
Make Steiger
Model Tiger III ST-470
Country United states
Production From 1980  Until 1982
Price -
Tractor type Four wheel Drive (4WD) tractor
Fuel diesel
Service repair manual Steiger Tiger III ST-470 Manual

Dimensions, sizes and tires
AG front tires 30.5x32
AG rear tires 30.5x32
Lawn front tires -
Lawn rear tires -
Indus front tires -
Indus rear tires -
Weight 45360 lbs or 20575 kg
Length 289 inches [734 cm]
Width 47 inches [119 cm]
Height 161 inches [408 cm]
Wheelbase 150 inches [381 cm]
Ground clearance -
Turning radius -
Rear tread size -
Front tread size -
Turning radius -

Horsepower and engin specs
Engine capacity 1150 ci or 18.8 L
Cylinders 6 cylinders
Engine power 470 hp or 350.5 kW
Engine RPM 1700 (rpm)
Torque 1580 lb-ft or 2142.5 Nm
Torque RPM 1500 (rpm)
Fuel type diesel
Fuel injection -
Fuel tank size 385 gal or 1457.2 L
Oil capacity 76 qts or 71.9 L
Oil change -
Starter motor -
Starter volts 24 V
Parts And Accessories Steiger Tiger III ST-470 Parts
Electrical and battery specs
Batteries number 4
Batteries voltage 12 V
Battries Amps -
Cold Amps 625
Ground force -
Charging system alternator
Charging Volts -
Charging Amps 90 amps
Clutch and gearbox specs
Trans system Allison CLT 5965
Trans type full power shift with torque converter
Trans gears 6 forward and 1 reverse
Clutch system -
Cabine and mechanical specs
Wheel drive 4x4 articulated 4WD
Final drive -
Steering articulated power
Braking system hydraulic disc
Cabin type Safari Cab standard with air-conditioning
Differentiel lock -
Hydraulics specifications
System open center
Valves 5
Pump flow 38 gpm or 143.8 lpm
SVC flow 12 gpm or 45.4 lpm
Steering flow -
Tank capacity 48 gal or 181.7 L
Hydraulic pressure 2250 psi or 155.1 bar
Max flow -
Drawbar specifications
Drawbar type -
Claimed power -
Drawbar horsepower 369.76 hp or 275.7 kW
Fuel consumption 23.7 gal/hour or 89.7 l/hour
Pulling power 42715 lbs or 19375 kg
Power take-off (PTO) specs
Claimed power -
Real power -
Engine @RPM -
PTO Clutch -
Rear PTO -
Rear PTO RPM -
Front PTO -
Front PTO RPM -
Mid PTO -
Mid PTO RPM -
Fuel consumption -
3 point hitch specifiations
Hitch system -
Rear hitch -
Rear hitch lift -
Front hitch -
Front hitch lift -

Allis Chalmers 8010 1982 comparison online with competitors

Allis Chalmers 8010

General Infos
Make Allis Chalmers
Model 8010
Country United states
Production From 1982  Until 1985
Price 46,176  USD
Tractor type -
Fuel diesel
Service repair manual Allis Chalmers 8010 Manual

Dimensions, sizes and tires
AG front tires 11.00-16 (2WD)
AG rear tires 20.8-38
Lawn front tires -
Lawn rear tires -
Indus front tires -
Indus rear tires -
Weight 12,630 lbs or 5728 kg
Length 187 inches [474 cm]
Width 92.6 inches [235 cm]
Height 114 inches [289 cm]
Wheelbase 106 inches [269 cm] (2WD)
Ground clearance 17.5 inches [44 cm] (4WD front axle)
Turning radius -
Rear tread size -
Front tread size -
Turning radius -

Horsepower and engin specs
Engine capacity 301 ci or 4.9 L
Cylinders 6 cylinders
Engine power -
Engine RPM 2300 (rpm)
Torque -
Torque RPM -
Fuel type diesel
Fuel injection -
Fuel tank size 60 gal or 227.1 L
Oil capacity 16 qts or 15.1 L
Oil change -
Starter motor -
Starter volts 12 V
Parts And Accessories Allis Chalmers 8010 Parts
Electrical and battery specs
Batteries number -
Batteries voltage 12 V
Battries Amps -
Cold Amps -
Ground force -
Charging system alternator
Charging Volts -
Charging Amps 100 amps
Clutch and gearbox specs
Trans system Power Shift
Trans type Allis-Chalmers
Trans gears 12 forward and 2 reverse
Clutch system -
Cabine and mechanical specs
Wheel drive 4x2 2WD
Final drive -
Steering hydrostatic power
Braking system differential hydraulic wet discs
Cabin type Acousta cab standard with heat and air-conditioning
Differentiel lock foot-button
Hydraulics specifications
System load-sensitive
Valves 2 or 3
Pump flow 22 gpm or 83.3 lpm
SVC flow -
Steering flow 9.5 gpm or 36.0 lpm
Tank capacity -
Hydraulic pressure -
Max flow 45 gpm or 170.3 lpm
Drawbar specifications
Drawbar type -
Claimed power -
Drawbar horsepower 91.46 hp or 68.2 kW
Fuel consumption 7.3 gal/hour or 27.6 l/hour
Pulling power 9,102 lbs or 4128 kg
Power take-off (PTO) specs
Claimed power -
Real power 109.55 hp or 81.7 kW
Engine @RPM -
PTO Clutch -
Rear PTO independent
Rear PTO RPM 540 (rpm)
Front PTO -
Front PTO RPM -
Mid PTO -
Mid PTO RPM -
Fuel consumption 7.3 gal/hour or 27.6 l/hour
3 point hitch specifiations
Hitch system -
Rear hitch II
Rear hitch lift 6,680 lbs or 3030 kg
Front hitch -
Front hitch lift -

Related tractor comparison


1982 Allis Chalmers 8010 competitors and comparison tool online specs and performance
1980 Deutz-Fahr 4507 competitors and comparison tool online specs and performance

Allis Chalmers 8010 Deutz-Fahr 4507

1980 Steiger Tiger III ST-470 competitors and comparison tool online specs and performance
1982 IMT 5100 competitors and comparison tool online specs and performance

Steiger Tiger III ST-470 IMT 5100

1980 Steiger Tiger III ST-470 competitors and comparison tool online specs and performance
1983 Ford 1210 competitors and comparison tool online specs and performance

Steiger Tiger III ST-470 Ford 1210

1982 Allis Chalmers 8010 competitors and comparison tool online specs and performance
1983 John Deere 3540 competitors and comparison tool online specs and performance

Allis Chalmers 8010 John Deere 3540

1982 Allis Chalmers 8010 competitors and comparison tool online specs and performance
1980 IMT 539 competitors and comparison tool online specs and performance

Allis Chalmers 8010 IMT 539

1982 Allis Chalmers 8010 competitors and comparison tool online specs and performance
1982 Fiat 665C competitors and comparison tool online specs and performance

Allis Chalmers 8010 Fiat 665C


Choose another tractor









Useful links and guides ....